Pipe Fitting

DOUBLE 11.25° SOCKET DEGREE BEND

Material: S.G. Iron

Double socket 11.25° bend for gentle directional changes in water supply and drainage pipelines.

  • Features
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating

Available sizes: DN 80 to DN 300

Know More

DOUBLE 22.5° SOCKET DEGREE BEND

Material: S.G. Iron

Double socket 22.5° bend for water supply and drainage pipelines.

  • Features
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating

Available sizes: DN 80 to DN 300

Know More

DOUBLE 45° SOCKET DEGREE BEND

Material: S.G. Iron

Double socket 45° bend for medium-angle directional changes in pipelines.

  • Features
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating

Available sizes: DN 80 to DN 300

Know More

DOUBLE 90° SOCKET DEGREE BEND

Material: S.G. Iron

Double socket 90° bend for right-angle directional changes in water supply and drainage.

  • Features
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating

Available sizes: DN 80 to DN 300

Know More

DOUBLE FLANGED 45° BEND

Material: S.G. Iron

Double flanged 45° bend for flanged pipeline systems.

  • Features
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating

Available sizes: DN 80 to DN 300

Know More

FLANGED SPIGOT

Material: S.G. Iron

Flanged spigot for connecting pipes in flanged pipeline systems. Wide size range.

  • Features
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating

Available sizes: DN 80 to DN 600

Know More

FLANGED PN 10

Material: S.G. Iron

PN-10 flanged ring for flanged pipe joints. Available DN 80 to DN 600 with detailed bolt hole dimensions.

  • Features
  • Manufacturing Standard – IS 9523 / ISO 2531 / EN545
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating
  • Customisable – Tailored to requirements

Available sizes: DN 80 to DN 600

Know More

SOCKET TEE

Material: S.G. Iron

Socket tee for branching pipeline connections.

  • Features
  • Manufacturing Standard – IS 9523 / ISO 2531 / EN545
  • Material – S.G. Iron
  • Options
  • Coating – Powder/Epoxy coating
  • Customisable – Tailored to requirements

Available sizes: DN 80 to DN 300

Know More

Mechanical Joint Accessories

Loose Split Flange (Dn-100 To Dn 600,pn10 /16)

D400

Material: S.G. Iron (Ductile Iron)

A two-piece ductile iron flange fitted around the spigot end of a pipe or fitting, enabling bolted connection to flanged valves, pumps and fittings without rotating the pipe. The split design is essential for installations in confined spaces and retrofit or repair work on existing pipelines where full pipe rotation is not possible.

Features:

  • Two-piece split design — install and remove without rotating the pipe
  • Enables flanged connection to valves, pumps and fittings in confined spaces
  • Ideal for retrofit, maintenance and repair on existing pipelines
  • High-strength SG iron for rated pressure applications
  • Complies with IS 9523 / ISO 2531 / EN545
  • Powder or epoxy coating for corrosion protection

Options:

  • Coating — Powder / Epoxy (various colours and microns)
  • Pressure rating — PN-10 and PN-16

Manufacturing Standard: IS 9523 / ISO 2531 / EN545

Available sizes: DN 100 to DN 600, PN-10/16

View More

Gland For E-type Mechanical Joint (Dn-100 To Dn 400,pn10 /16)

Material: S.G. Iron (Ductile Iron)

A ductile iron follower gland used in standard mechanical joint assemblies to compress the rubber gasket against the pipe spigot and bell socket, creating a watertight, flexible seal. The E-type gland profile ensures even gasket compression around the full pipe circumference. Widely used in water distribution, sewage and industrial pipeline networks where ease of field assembly is a priority.

Features:

  • Compresses rubber gasket evenly for a watertight, flexible mechanical joint seal
  • E-type profile ensures uniform gasket load distribution around the full pipe circumference
  • Accommodates angular deflection and minor pipe misalignment
  • Simple field assembly — no welding or special tools required
  • Suitable for water distribution, sewage and industrial systems
  • High-strength SG iron for pressure-rated applications
  • Complies with IS 9523 / ISO 2531 / EN545
  • Powder or epoxy coating for corrosion protection

Options:

  • Coating — Powder / Epoxy (various colours and microns)
  • Pressure rating — PN-10 and PN-16
  • Compatible gasket materials: EPDM (potable water), SBR (general use), NBR (oils/chemicals)

Manufacturing Standard: IS 9523 / ISO 2531 / EN545

Available sizes: DN 100 to DN 400, PN-10/16

View More

Retainer Ring (Dn-100 To Dn 900,pn10 /16)

Material: S.G. Iron (Ductile Iron)

A ductile iron retainer ring is a locking component used in restrained mechanical joint assemblies to grip the pipe spigot and prevent axial pullout under internal pressure, water hammer or ground movement. Installed between the pipe and the gland, the retainer ring’s serrated or toothed inner edge bites into the pipe wall when tension is applied, providing a positive mechanical lock that eliminates the need for concrete thrust blocks at bends, tees, reducers and end caps.

Features:

  • Prevents axial pipe pullout under internal pressure, water hammer and ground movement
  • Serrated or toothed inner edge grips pipe spigot for positive mechanical restraint
  • Eliminates need for concrete thrust blocks at bends, tees, reducers and end caps
  • Accommodates angular deflection while maintaining axial restraint
  • Widest size range in the mechanical joint accessories range — up to DN 900
  • Suitable for water mains, sewage rising mains and industrial pressure pipelines
  • High-strength SG iron for long-term performance in buried conditions
  • Complies with IS 9523 / ISO 2531 / EN545
  • Powder or epoxy coating for corrosion protection

Options:

  • Coating — Powder / Epoxy (various colours and microns)
  • Pressure rating — PN-10 and PN-16

Manufacturing Standard: IS 9523 / ISO 2531 / EN545

Available sizes: DN 100 to DN 900, PN-10/16

D400

View More

Gland For T-type Restrained Joint (Dn-100 To Dn 900,pn10 /16)

D400

Material: S.G. Iron (Ductile Iron)

A ductile iron gland used in T-type restrained joint assemblies to provide axial restraint and prevent pipe pullout under operating pressure. The T-type configuration works in conjunction with retainer rings and locking segments to grip the pipe spigot positively, forming a fully restrained joint that accommodates angular deflection while resisting axial forces. Essential for pressure pipelines at bends, tees and reducers where thrust block construction is not feasible.

Features:

  • T-type configuration provides positive axial restraint against pipe pullout
  • Works with retainer rings and locking segments for fully restrained joint assembly
  • Accommodates angular deflection — suitable for uneven ground and directional changes
  • Eliminates need for concrete thrust blocks at bends, tees and reducers
  • Widest size range — covers trunk mains and large-diameter pipelines up to DN 900
  • Suitable for water supply, sewage rising mains and industrial pressure pipelines
  • High-strength SG iron for long-term reliability in buried conditions
  • Complies with IS 9523 / ISO 2531 / EN545
  • Powder or epoxy coating for corrosion protection

Options:

  • Coating — Powder / Epoxy (various colours and microns)
  • Pressure rating — PN-10 and PN-16

Manufacturing Standard: IS 9523 / ISO 2531 / EN545

Available sizes: DN 100 to DN 900, PN-10/16

View More

Enquire Now